RTS Blog

  Dec 1, 2021 2:19:15 PM

One of the many considerations for companies that manufacture electronics components and electronics devices—as well as the organizations that use these products for aerospace applications—is how they will be affected by interactions with high-energy particles. What are called single event effects (SEEs) occur when a single, energetic particle collides with an electronic component or device and causes a change to it.

These changes come in many forms, including single event latchup, single event burnout and single event upset. Single event gate rupture and single event dielectric rupture can occur as well.

These single event phenomena can be destructive or non-destructive, with destructive SEEs adversely affecting aerospace applications and potentially rendering systems inoperable.

 

Single Event Latchup (SEL)

Single event latchup is when you have a parasitic transistor in a device that is not intentionally there and a particle passing through a sensitive spot in the device turns the transistor on. When this occurs, there is no way to turn the transistor off. As a result, if power isn’t removed quickly, thermal runaway, and energy and heat levels that the material of the device cannot withstand, can occur, melting device components.  

 

Single Event Burnout (SEB)

Single event burnout is similar to single event latchup. A single strike from an energetic particle produces a localized high-current state that can result in a catastrophic failure. This can include the burnout of power MOSFETs and other problems.

 

Single Event Upset (SEU)

Single event upset produces errors in circuits as charged particles ionize the medium that they pass through. In the process, they leave behind a wake of electron-hole pairs. SEUs are non-destructive, transient soft errors. Devices that are reset or rewired can resume normal functioning. SEUs are often single bit upsets, which are bit flips in memory cells or registers. Adjacent bit or multi bit upset can occur, as well, if a single particle hits two or more bits and produces simultaneous errors.

 

Other Non-Destructive Single Event Effects

There are a number of other non-destructive SEEs. For example, single event transients (SETs) are an analog response that manifests as a turn-on or turn-off of voltage in which voltage peaks and then resettles. This can be a problem if downstream electronics can’t handle the change.

Stuck bits (or persistent single event upsets) are another possible problem, as are single event functional interrupts (SEFI) in which hits to the control circuitry for accessing memory or a device require power cycling or other actions to correct the problem.

 

Addressing Single Event Effects with Radiation Effects Testing

Given their potential for producing anything from minor, transient issues to catastrophic failures, it is important that all components and devices designed for use in aerospace devices be thoroughly tested. Procedures like SET tests, SEL tests and SEE tests in general can help designers and manufacturers isolate, identify and address adverse single event effects.

 

When assessing SEEs, it’s important to think holistically. Not only can these events affect the part or component in which they occur, they can also have subsequent effects on the system as a whole. This means that with each round of testing for radiation effects following design changes, consideration should be given to other components or systems that may be affected.

Article Topics:
Single Event Effects